53 Results for : comparators

  • Thumbnail
    PIC 16F753-I/P - MCU, PICmicro, 3,5 KB, 20 MHz, PDIP-14
    Features • Flash Program Memory with self read/write capability• Mid-Range Core, Internal 8MHz oscillator• 1 x Op Amp • 2 x High Speed Analog Comparators (50nS)• 1 x Capture-Compare-PWM (CCP)• 8 x 10-bit Analog-to-Digital Converter (ADC) with voltage reference, • 1 x Dual Range 9-bit Digital-to-Analog Converter (DAC)• Complementary Output Generator (COG): Complementary Waveforms from selectable sources• Watchdog Timer (WDT)• Power-On/Off-Reset, Brown-Out Reset (BOR)• In Circuit Serial Programming (ICSP)• High Current Source/Sink: 2 pins with 50 mA I/O, 9 pins with 25 mA I/O• Wide Operating Voltage of PIC16F753 variant (2.0V - 5.5V)• High Voltage PIC16HV753 variant (2.0V - user defined) with internal shunt regulator
    • Shop: reichelt elektronik
    • Price: 1.50 EUR excl. shipping
  • Thumbnail
    32MX570F512L-IPT - MIPS32 M4K® Mikrocontroller, 32-bit, 2,3-3,6V, 512 KB, TQFP-100
    • Up to 50 MHz/83 DMIPS, MIPS32 M4K core• USB 2.0-compliant Full-speed OTG controller• Controller Area Network (CAN) 2.0B Compliant with DeviceNetTM addressing support• Four I2S/SPI modules for Codec and serial communications• Peripheral Pin Select (PPS) functionality• Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces• mTouch Capacitive touch Technical Data: • Max Speed MHz: 50• Program Memory Size: 512 KB• RAM: 64 KB• Auxiliary Flash: 3 KB• Temperature Range: -40 ... 105°C• Operating Voltage Range: 2.3 ... 3.6 V• DMA Channels: 8• SPITM: 4• I2CTM Compatible: 2• A/D channels :48• Input Capture: 5• 16-bit Digital Timers: 5• Parallel Port PMP• Comparators: 3• Internal Oscillator: 8 MHz, 32 kHz• I/O Pins: 81• Pin Count: 100
    • Shop: reichelt elektronik
    • Price: 6.20 EUR excl. shipping
  • Thumbnail
    PIC 16F1787-I/MV - MCU, PICmicro, 14 KB, 32 MHz, UQFN-40
    Features:• Enhanced Mid-Range Core with 49 Instruction, 16 Stack Levels• Flash Program Memory with self read/write capability• 256 Bytes of EEPROM• Internal 32MHz oscillator• 3 x PSMC (Programmable Switch Mode Controller)- Dedicated 16bit PWM- Digital and/or analog feedback control of PWM frequency- Dead-band control / auto-shutdown & restart• 4 x Fast Comparators with selectable Voltage Reference• 3 x Operation Amplifiers (rail-to-rail in and out)• 14 x 12-bit ADC with Voltage Reference • 8-bit DAC • MI2C / SPI / EUSART w/auto baud• 3 x Compare-Capture-PWM• Four 8-bit Timer (TMR0/TMR2/TMR4/TMR6)• One 16-bit Timer (TMR1)• Extended Watchdog Timer (EWDT)• Wide Operating Voltage Range:- ‘F’ Version (2.3V - 5.5V)- Low Power ‘LF’ variant (1.8V - 3.6V)• 25mA Source/Sink current I/O• Enhanced Power-On/Off-Reset• Brown-Out Reset (BOR)• In Circuit Serial Programming (ICSP)
    • Shop: reichelt elektronik
    • Price: 2.35 EUR excl. shipping
  • Thumbnail
    PIC 16LF1554-ISL - MCU, PICmicro, 7 KB, 32 MHz, SO-14
    The PIC16LF1554 micro controller delivers unique on-chip features for the design of mTouch and general purpose applications in 14-pin count packages. Up to 11 analog channels connecting to two 10-bit ADCs with automated hardware CVD modules, two PWMs and multiple communication peripherals offer an excellent solution to implement capacitive sensing and other front-end sampling applications with minimal software overhead.• Dual Analog to 10-bit Digital Converter (ADC )• 12 Channel 10-bit ADC• Advanced Controls for mTouch CVD (Capacitive Voltage Divider)• Voltage Reference• MI2C, SPI, UART• 2 PWMs• 25 mA Source/Sink current I/O• 32 MHz internal oscillator• Low Power Brown Out Reset (LPBOR)• Extended Watchdog Timer (WDT)• In-Circuit Debug Technical Data: • Program Memory: 7 kb• CPU Speed (MIPS): 8• RAM: 256 Bytes• Timer: 2 x 8-bit, 1 x 16-bit• Interface: 1-UART, 1-SPI, 1-I2C• Comparators: 4• Operating Voltage: 1,8 ... 3,6 V• Pin: 14
    • Shop: reichelt elektronik
    • Price: 0.87 EUR excl. shipping
  • Thumbnail
    PIC 16LF1559-ISS - MCU, PICmicro, 14 KB, 32 MHz, SSOP-20
    The PIC16LF1559 micro controller delivers unique on-chip features for the design of mTouch and general purpose applications in 14-pin count packages. Up to 11 analog channels connecting to two 10-bit ADCs with automated hardware CVD modules, two PWMs and multiple communication peripherals offer an excellent solution to implement capacitive sensing and other front-end sampling applications with minimal software overhead.• Dual Analog to 10-bit Digital Converter (ADC )• 12 Channel 10-bit ADC• Advanced Controls for mTouch CVD (Capacitive Voltage Divider)• Voltage Reference• MI2C, SPI, UART• 2 PWMs• 25 mA Source/Sink current I/O• 32 MHz internal oscillator• Low Power Brown Out Reset (LPBOR)• Extended Watchdog Timer (WDT)• In-Circuit Debug Technical Data: • Program Memory: 7 kb• CPU Speed (MIPS): 8• RAM: 512 Bytes• Timer: 2 x 8-bit, 1 x 16-bit• Interface: 1-UART, 1-SPI, 1-I2C• Comparators: 4• Operating Voltage: 1,8 ... 3,6 V• Pin: 14
    • Shop: reichelt elektronik
    • Price: 0.99 EUR excl. shipping
  • Thumbnail
    PIC 12F1612-I/P - MCU, PICmicro, 3,5 KB, 32 MHz, DIP-8
    PIC16(L)F161X microcontrollers deliver on-chip features that are unique to the design for embedded control of small motors and general purpose applications in 8 and 14 pin count packages. Features like 10-bit A/D, CCP, 24-bit SMT, Zero Cross Detection offer an excellent solution to variety of applications. The product family also has a CRC and Windowed WDT to support safety critical end equipment in home appliances and other end markets. • Flash Program Memory with self read/write capability• Enhanced Mid-Range Core, Internal 32MHz oscillator• 2 x 24-bit Signal Measurement Timer (SMT)• 2 x Analog Comparators • 2 x Capture-Compare-PWM (CCP)• 4 x 10-bit Analog-to-Digital Converter (ADC) with voltage reference• Complementary Waveform Generator (CWG): • Zero Cross Detection (ZCD)• Windowed Watchdog Timer (WWDT)• CRC: 16-bit with DMA• Power-On Reset (POR), Brown-Out Reset (BOR)• In Circuit Serial Programming (ICSP)• Wide Operating Voltage of PIC12F1612 variant (2.3V - 5.5V)• Enhanced Low-Voltage PIC12LF1612 variant (1.8V - 3.6V)
    • Shop: reichelt elektronik
    • Price: 1.30 EUR excl. shipping
  • Thumbnail
    PIC 12F1612-I/SN - MCU, PICmicro, 3,5 KB, 32 MHz, SO-8
    PIC16(L)F161X microcontrollers deliver on-chip features that are unique to the design for embedded control of small motors and general purpose applications in 8 and 14 pin count packages. Features like 10-bit A/D, CCP, 24-bit SMT, Zero Cross Detection offer an excellent solution to variety of applications. The product family also has a CRC and Windowed WDT to support safety critical end equipment in home appliances and other end markets. • Flash Program Memory with self read/write capability• Enhanced Mid-Range Core, Internal 32MHz oscillator• 2 x 24-bit Signal Measurement Timer (SMT)• 2 x Analog Comparators • 2 x Capture-Compare-PWM (CCP)• 4 x 10-bit Analog-to-Digital Converter (ADC) with voltage reference• Complementary Waveform Generator (CWG): • Zero Cross Detection (ZCD)• Windowed Watchdog Timer (WWDT)• CRC: 16-bit with DMA• Power-On Reset (POR), Brown-Out Reset (BOR)• In Circuit Serial Programming (ICSP)• Wide Operating Voltage of PIC12F1612 variant (2.3V - 5.5V)• Enhanced Low-Voltage PIC12LF1612 variant (1.8V - 3.6V)
    • Shop: reichelt elektronik
    • Price: 0.93 EUR excl. shipping
  • Thumbnail
    Probleme eines Economic Public Sector Comparators am Beispiel der Magnetschnellbahn in München
    Probleme eines Economic Public Sector Comparators am Beispiel der Magnetschnellbahn in München ab 72 € als pdf eBook: . Aus dem Bereich: eBooks, Wirtschaft,
    • Shop: hugendubel
    • Price: 72.00 EUR excl. shipping
  • Thumbnail
    MCP 8024-H/MP - Motortreiber, für DC-Motoren, QFN-40
    The MCP8024 is a 3-Phase Brushless DC (BLDC) Gate Driver with power module. The MCP8024 device integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller, power monitoring comparators, an overtemperature sensor, two level translators and three operational amplifiers for motor current monitoring.• Three Half-bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs• Independent input control for high-side NMOS and low-side NMOS MOSFETs• Peak output current: 0.5A @ 12V• Shoot-through protection• Overcurrent and short circuit protection • Adjustable Output Buck Regulator (750 mW)• Fixed Output Linear Regulators: 5V @ 20 mA12V @ 20 mA• Internal Bandgap Reference• Three Operational Amplifiers for Motor Phase Current Monitoring and Position Detection• Overcurrent Comparator• Two Level Translators• Input Voltage Range: 6 - 40V • Operational Voltage Range: 6 - 28V• Undervoltage Lockout (UVLO): 6V• Overvoltage Lockout (OVLO): 28V• Transient (100 ms) Voltage Tolerance: 48V• Extended Temperature Range: TA -40 to +150°C• Thermal Shutdown
    • Shop: reichelt elektronik
    • Price: 3.21 EUR excl. shipping
  • Thumbnail
    MCP 8026-115E/MP - Motortreiber, für DC-Motoren, QFN-40
    The MCP8026 is a 3-Phase brushless motor gate driver and power module that integrates the following features: key-off Sleep mode, a LIN transceiver, a buck voltage regulator, two LDO regulators, power monitoring comparators, an over-temperature sensor, a zero-crossing detector, a neutral simulator, a comparator + an operational amplifier for motor current monitoring.The phase comparator and multiplexer allow for hardware commutation detection. The neutral simulator allows commutation detection without a neutral tap in the motor. The buck converter is capable of delivering 750 mW of power for powering a companion microcontroller. The buck regulator may be disabled if not used. The on-board 5 V and 12 V low dropout voltage regulators are capable of delivering 30 mA of current.• Integrated Operational Amplifier• Overcurrent Comparator With DAC Reference• Phase Comparator With Multiplexer• Neutral Simulator• Adjustable Output Buck Regulator (750 mW)• Operational Voltage Range: 6 ... 19 V• Buck Regulator Undervoltage Lockout: 4.0 V• Undervoltage Lockout (UVLO): 5.5 V• Overvoltage Lockout (OVLO): 20 V• Transient (100 ms) Voltage Tolerance: 48 V Technical Data: Operating Voltage: 6 ... 28 VOutput Current: 50 mAMotor Control: PWM
    • Shop: reichelt elektronik
    • Price: 1.90 EUR excl. shipping

Similar searches: